Slide the up right shortcut toolbar down, and we can turn on the function we need.
Viva H8 Life
To turn the tablet into a hotspot, perform the following settings. :
Menu>Settings >More.>Tethering and portable hotspot>Wi-Fi Hotspot >Activities
Many applications are suggested and provided by developers without a prior compatibility test with the working systems and the hardware configuration of various product models, so there may be APK documents not totally compatible with your device.
To turn off this feature, you have to take the following steps: Menu>Settings> Language and text input>Uncheck “Spelling checker”.
To reset the tablet to the initial parameters, please take the following steps: Main menu -> Settings > Backup and reset->Reset the default configuration.
Please note that this reset will delete all data stored in the internal memory of the device.
To turn on the facial unblock feature, go to Menu>Settings>Safety>Screen Block>Facial Unblock>Configure.
Go to Menu>Settings>Bluetooth>Bluetooth activities>Touch the three dots in the right corner of the display>Rename the tablet.
To view more (Battery level, SIM status, IMEI information) you have to go to Menu>Settings >About the tablet>Status.
To make a screenshot without the need to have a profile application, you only have to keep Power and minus Volume pressed simultaneously or you can slide the up right shortcut toolbar and select Screen Capture.
To have a higher battery autonomy of the tablet, you should do the following: set the background light to a lower level, the display closing time to 30 seconds, turn off the WiFi while not using it, use the Task management applications not to overload CPU and the memory, and fully charge the battery.
It is normal for it to heat up, due to the processor. Depending on the running processes, the tablet may heat up more or less.
The applications may not be uninstalled but may be turned off as follows: Menu> Settings > Applications> All > Select the application > Turn off.
Smart2View Flash should be plugged to the TV set by means of the HDMi coupling (the TV set should be set by using the HDMI remote control).
In the tablet menu, go to: Settings >Display >Wireless Screen. Tick "Turn on the wireless screen” by pressing the 3 perpendicular dots in the upper right corner of the tablet.
The tablet can be charged by plugging the device to the PC, by means of the USB data cable (subassembly in the product package) ATTENTION! The tablet can be charged only with the USB cable in the package.
To view the recently started applications, press the overlapped squares icon until the tabs of the recently started applications show up. To close the recently started applications, slide left or right (up or down depending on whether the tablet is placed horizontally or vertically).
The plugging can be done as follows:
the memory flash is plugged to the tablet by means of the OTG cable - select File Manager -> from Home (the house like icon), select Device-> usbotg -> Select the document.