AGREEMENT WHEN ACCESSING THE ALLVIEW WEBSITE

We hereby notify you that S.C. Visual Fan S.R.L. may collect any information about your person, through any type of identifiers such as name, identification number, location data, online identifier or one or more specific elements of your physical or social identity; To continue browsing the ALLVIEW website, please check the box "Accept".

3G integrated HSPA+, calling function
SO: Android 4.4, KitKat®
Display: 8” IPS-LCD, 1280x800 px
CPU: Cortex A7, 1,3 GHz, Quad Core
GPU: Mali 400 MP2
RAM memory: 1GB DDR3
Flash memory: 16GB
GPS, Bluetooth, Wi-fi
Main camera: 5MP OV5647, Rec. Full HD, HDR
Secondary camera: 2MP
Stereo headphones
Slim design, aluminum back case
Battery: 4000 mAh

Viva H8 plus

The device cannot be turned on if the power level is below critical limit. Charge the battery for a few minutes and restart the device.
Check if the charger is correctly connected and well assembled.

Many apps suggested and available by the developers, without compatibility testing with the operating systems and hardware configuration first, of different products models, so there might be APK documents that they are not fully compatible with your device.

For a higher battery's autonomy we recommend to do the following: the background light should be set at a lower value, the display's sleep should be set at 30 seconds, closing Wi-Fi if it is not used, using Task management apps for a lower charge of the CPU and memory, and the battery charges to be full.

Access Settings>Backup & reset>Factory data reset. Reset the tablet. ATTENTION! By resetting the tablet, any kind of data will be deleted from your tablet.

It is normal due to the processor. Depending in the run processes, the tablet can warm up more or less.

To make or to receive calls on this tablet, you need a voice SIM card. This must be inserted in the special slot, with the tablet turned off. When the tablet is turned on, you can use the voice SIM.

The Smart2View stick must be connected to the TV via HDMI jack (the TV must be set to HDMI by remote control) In the tablet's menu, access the Wireless Scree and on the top right corner we switch to ON (Search dispalys). When the Smart2View is found we can connect.

Color Swatches Magento extension by Dsthemes Magento Themes